Eco Air ECO-DD122 MK4 Operations Instructions download pdf (Page 12)

TO DRAIN WATER

You may use a hose with an inner diameter of 12mm for

continuous drainage:

1. Use a screwdriver to remove the knockout at the back. Attach

the tubing to the connector through the hole.

2. The tubing should be lead to the drain with no sharp bends.

Note:

1. The bucket must be in the correct position before tubing.

2. Remove the tubing before pulling out the bucket.

TO EMPTY THE BUCKET

1. When the bucket is full, the "FULL" LED lights and the unit stops

in a few minutes

2. Do not move the unit or remove the bucket, if the machine is still operating, as

water may leak, damage the unit or cause an electric shock.

3. To remove the bucket, pull it out by gripping the bottom of the bucket,

and lift carefully.

4. Remove the cover of bucket first, then pour the water away, clean the bucket and

restore the cover and the bucket to the correct position.

Pull bucket out Lift by the handle Remove the cover Pour the water away

Restore the cover

and the handle

Restore the bucket

NOTE :

Clean the bucket with clean water if needed. Do not use detergent, solvent, abrasive

or hot water to avoid damage to the appliance.

Do not remove or damage the float in the bucket, or the unit cannot

work correctly.

The bucket cover must be well fitted in position.

The "FULL" Led lights if the bucket is not well in place.

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Eco Air ECO-DD122 MK4 Operations Instructions Page 12